Flexibele, zelfklevende sierlijsten op rol. Mat wit en overschilderbaar in elke kleur, voor een verfijnd resultaat in elke ruimte.
4,8 sterren en al 450+ interieurs geüpgraded.
Nog niet ingeschreven? Schrijf je in en we mailen je zodra de Woonmaand start.
Not difficult at all. Thanks to Velida's self-adhesive Flex frames, you can get started without experience, glue or tools. You only have to mark where the Flex frames should go, cut to size and stick. We do advise to paint the Flex frames for the best effect.
Want to know exactly how the installation works? Read our installation manual here.
This depends on which design you would like to apply.
To help you get started, we've written a guide on how to easily determine how much length you need.
Yes. The frames are equipped with a high-quality adhesive strip that ensures long-term adhesion, even on smooth plastered walls or renovation fleece. Make sure that the surface is free of grease and dust.
Once you have pressed the molding firmly and the shape has become final, we do not recommend pulling it off again. The adhesive strip is very strong and ensures long-lasting adhesion, but can leave marks on painted walls when removed.
Absolutely. All Velida Flex frames can be painted over with wall paint. This way you can fully integrate them into your interior colour or create a beautiful accent wall with a tone-on-tone effect.
During application you can still carefully correct the Flex frames. We recommend that you first lightly draw the line with a pencil, so that you can follow the molding straight and tight.
For the best result, it is best to do this together: one person holds the Flex frames under tension, the other presses it precisely against the marked line.
Once you have pressed the molding firmly and the shape has become final, we do not recommend pulling it off again. The adhesive strip is strong and ensures long-lasting adhesion, but can leave marks on painted walls when removed.
Our tip: Take your time when marking and applying. That way you will make sure it will be installed correctly and you can enjoy the end result for years to come.
Yes, that is precisely the strength of the Velida Flex frames. Thanks to the flexible material, you can effortlessly apply round shapes and arch decorations without sawing.
Velida Flex frames are basically designed as a sustainable interior upgrade. But do you still want to remove them? You can, as long as you do this carefully and in a controlled manner.
Important: Always pull the moldings off slowly in sections. Start at one side and pull gradually, without jerking. This prevents damage to the wall or paint layer.
With firmly pressed frames (especially after a long period of time), the adhesive strip may adhere so well that paint may come off when removed, especially on vulnerable surfaces such as thin layers of paint or untreated renovation fleece.
Our tip: If necessary, warm the molding slightly with a hair dryer (lukewarm) before loosening it. This makes the glue a little more flexible and reduces the chance of damage.
Do you want to be 100% sure of damage-free removal in the future? Then first test on an inconspicuous piece of wall or choose to mount on well-painted, smooth surfaces.
Yes, the material is moisture-resistant and bends without breaking. However, the surface must be dry and flat during application.
Please note ¹ : for optimal adhesion of the Flexlijsten it is important that the surface is clean, dry and free of grease. Our mouldings adhere to smooth walls, painted surfaces, wood, tiles and wallpaper.
Not suitable for rough or porous surfaces such as brick or plaster without a finish.
